Home   |   Contact   |   Downloads   |   Login
AustragshilfenDischarging devicesDispositifs d'extractionDispositivos de extracción
solids solutions group

solids Discharging devices

The discharging of bulk solids from silos or containers requires improving the product's flow characteristics.
Many bulk solids do not discharge freely through the generally feasible, expedient filling/discharge cross sections.
Flow is achieved by the application of force to loosen up settled grains/particles/fibres.
Depending on product characteristics, operating conditions and the type of task, vibration, fluidisation / ventilation, or mechanical agitation / mechanical tumbling is selected as a suitable method for discharging.


The solids discharging devices are offered in the 4 Designlines solids Basic, solids Clean, solids Hygienic, solids Heavy.

 

Detailed specifications can be found in the DATASHEETS

Vibration Bin Discharger "ExtraVib" Type EVK

Discharge out of silos with mass flow avoids clearance volumes and segregation, permits high loads.
 

Vibration Bin Discharger "ExtraVib" Type EVK

Vibration bin discharger for hygroscopic bulk solids


Datasheet Vibration Bin Discharger EVK-Basic

Datasheet Vibration Bin Discharger EVK-Clean

  

Vibration Bin Discharger "ExtraVib" Type EVK-Hygienic

Using mass flow for silo discharge under hygienic conditions, avoids dead zones and particle segregation, permits high loads, Hygienic Design acc. EHEDG-Guidelines

 

Vibration Bin Discharger "ExtraVib" Type EVK-Hygienic

Datasheet Vibration Bin Discharger EVK-Hygienic-Dry

Vibration Cone Type EVS

In addition to a smooth discharge from containers or silos, our vibratory hoppers also provide high metering consistency by optimally filling the metering device.

 

Vibration Cone Type EVS

 

Datasheet Vibration Cone EVS-Basic


Datasheet Vibration Cone EVS-Clean


Datasheet Vibration Cone EVS-Hygienic-Dry

 

 

 

Aeration Bottoms Type FLC

Discharge and homogenising of fluidizable powders and dusts, gentle treatment of the discharged material.

 

Aeration Bottoms Type FLC

 

Datasheet Aeration Bottom FLC-Basic

Aeration Panel Type ADS/Aeration Pad Type ADF/Aeration Stick Type FLS

Selective aeration, flexible installable at the necessary points, part-fluidization in the silo cone.

 

Aeration Panel Type ADS/Aeration Pad Type ADF/Aeration Stick Type FLS

 

Datasheet Aeration Channel ADS-Basic


Datasheet Aeration Channel ADS-Clean

 

Datasheet Aeration Pad ADF-Clean

Datasheet Aeration Stick FLS-Clean

Agitator Type BAR

Homogenising and discharge, better dosing accuracy, optimal adaption of the agitator geometry to the product characteristics.


Agitator Type BAR

Datasheet Agitator BAR-Basic

Datasheet Agitator BAR-Clean